Author: Lynn Fleming

Top myths related to laser skin treatments debunked

Rumors and myths are everywhere and unless they are busted, they spread wrong notion and false claims. Medical/cosmetic world is no exemption and one such area where rumors and myths rule is laser skin treatment. It doesn’t matter if you stay in <Singapore> or different country, this modern technology capable of boosting self-confidence is under rated, thanks to those myths. So, if you are one of those people having wrong belief about laser treatment, read on as we debunk some of the myths revolve around it.

One such clinic in Singapore is IYAC Aesthetics and Anti-Aging Centre. Their attentive doctors will best advice whether you are suited for the treatment. In the case of laser skin treatment, Dr. Isabelle Yeoh will advise you according to your skin type. At IYAC, you can be assured the procedure will be pain-tolerable and fuss-free. You should visit their site if you are keen on IYAC laser skin rejuvenation Singapore.

Debunking color. Myth – I’m dark skinned, it is not for me!
Congratulations!! You are 100% wrong. Today’s modern laser equipment at your dermatologist’s clinic do not see your skin color and can very well treat dark skinned. These machines are adjustable to suit all or nearly all skin types. Before finalizing on this course, it is best to consult your dermatologist for the best recommendation.

Debunking time. Myth – laser skin treatment gives finger snapping results
It really depends on the type of treatment prescribed by your dermatologist for the type of problem you suffer. Most of these treatments sync with your body’s natural working process and hence, it will take time for the results to reflect – be it fading of acne/acne scars, fine lines, blemishes etc. Again, some treatment may take just one session and others a couple more. But, irrespective, your skin takes time to recuperate from the treatment.

Debunking aftermath. Myth – laser resurfacing leaves a residue after the treatment
This is not true! Though the earlier experiments of laser treatment (use of CO2 technology) used to leave a clear line, it is not the same anymore. Today’s lasers use fractionated CO2 technology helping skin rejuvenation with less healing time, superior results and no residual leaving behind.

Debunking recovery. Myth – recovery time post treatment is more
Again, it depends on the type of treatment you opt for. From example, fraxel laser skin resurfacing treatment, that changes skin texture irrespective of skin color and type, has a longer recovery period as compared to treatment for acne scars and blemishes. But laser treatments definitely have shorter recuperating period compared to surgeries.

Debunking type. Myth – lasers work only on top skin surface
That would be true if your area of problem is scars and blemishes which require surface level treatment only. But treatments like spider vein reduction and body sculpting, which is unwanted body fat removal, lasers dig deep into the skin to get the work done. The penetration depends on the wavelength of the light used.

Debunking fear. Myth – I will get cancer post laser treatment
Most people stay away from the laser skin treatment believing they will end up having cancer if they undergo it. But, this is not true in any sense whatsoever. The wavelengths of light used are operated under safe zone eliminating any possibility of harmful radiation.

Conclusion: You read and are still not convinced by the facts? Your dermatologist is the best person to guide you in person.

Get rid of your double chin problem through fat freezing

No one likes a double chin. Hardly any things influence you to look more seasoned than a twofold jaw or a turkey neck. We all want a prominent jawline that makes our face look lean.

One quick solution to this is CoolSculpting from IYAC Aesthetics & Anti-Aging Centre. This fat-freezing treatment is non-invasive, and has no downtime, which means you can attend the treatment and be ready to go out and meet friends after that. If you want to see results fast, do consider IYAC fat freeze procedure. You can check out their website here: https://www.iyac.com.sg/en/aesthetic-services/viewbya-z/coolsculpting.html

There are many reasons that make our face look fat with a double chin:

Age: with age the skin begins to sag. As the skin begins to lose its elasticity giving the look of an extra chin that sags. This contributes to the look of a double chin.

Weight due to imbalanced diet: gaining a lot of weight may not always contribute to having a double chin. However, at times it does lead to gaining a double chin. If you are having a diet that has a lot of calories and fat, it might lead to having a double chin.

Genetics: unfortunately genes also play a role in having a double chin. If there is a family history of double then one might have a double chin.

Posture: if you are always standing or sitting in a bad posture, then it might lead to a having a double chin. With the surrounding skin losing the elasticity, it might contribute to having a double chin.

How to get rid of double chin?
Exercise, lamentably, won’t make a big deal about a different leaner look woth no double chin. There’s uplifting news, however. The FDA as of late endorsed utilizing CoolSculpting techniques to dispose of fat underneath the chin. By chance if you haven’t known about CoolSculpting, it’s a safe, non-obtrusive strategy that slaughters off fat cells by solidifying them. This fat freezing in Singapore and other parts of the world is slowing gaining momentum.

Prepared specialists utilize controlled <fat freezing in Singapore> and other parts of the world, which focuses on the fat cells however not the cells of your skin around the double chin. The body at that point disposes of the fat cells normally. There’s next to no downtime, so after your treatment session, you can return to whatever you were doing.

Since the FDA has endorsed the utilization of CoolSculpting for the littler territory under the jaw, that opens up an awesome new treatment alternative for individuals experiencing the shame of twofold jaws. In case of have a fat neck or a double chin you don’t need to simply acknowledge it and attempt to live with it. You deserve to look at CoolSculpting and discover what this cutting edge treatment can improve the situation you.

Ask these questions before opting for a filler

The rising popularity of hyaluronic acid fillers as a cosmetic treatment can be seen worldwide as these fillers not only make your face look younger and more supple but are also not harmful. These are safe and dependable and the effects can last for months. Many people are now turning to these fillers in groves and consider a better and safer option than surgery or Botox. Hyaluronic acid is in fact naturally found in our skin and it works wonders to retain the skin’s moisture and make it look as good as possible.

IYAC Aesthetic & Anti-Aging Centre provides such services. With a combination of both invasive and non-invasive procedures, they also approach your treatment with professionalism and tailored advice. With prominent doctor Dr. Isabelle Yeoh at the centre, you can be assured your procedure will be pain-tolerable and fuss-free. You can check out IYAC hyaluronic filler at their website above.

But before you opt for these hyaluronic acid fillers, you should do your research and ask these questions:

What kind of credentials do you have?

For these fillers to have the desired effect, it is necessary to choose the right doctors, nurses and right practice. Once you do your research and zero in on a practice and a physician, you need to ask him about his credentials. It is necessary to pick an expert in facial anatomy who knows how to use these facial fillers properly. It is not enough that they are well-trained and qualified but you need to make sure that they are well-qualified and experienced in that particular field.

What kind of experience does he have?

It is necessary for the physician to have performed these kind of treatments before. Ask them about how many patients they had worked with and ask to see pictures of before and after the fillers. If possible , you can even try and talk to one of the former patients to get an idea of how good the physician is.

What are some side-effects?

In the case of <hyaluronic acid fillers>, there are little to no side-effects but it is still necessary to ask the physician what he thinks. Will these fillers be different for your particular skin and face and also check the needles that they will use.

Will the doctor be on the site?

It is necessary that in such cases, the physician is available on site and after the treatment in case of any complications. Suppose your face needs to be examined before and after the treatment, it is necessary that the trained doctor is hands on desk.

How long will the results last?

Make sure you ask the physician how long will these facial fillers have an effect on your particular skin type and face. Ask him to give a definitive time period as well as schedule regular follow-up examinations and check-ups.

Interior Design Education – InfoBarrel

When you choose it is time to suit your needs to start working in your backyard, you can find a couple of things that you’ll want to consider. This is definitely an opportunity to really flaunt your own personal unique style in a method that not really a professional could be able to get in touch with. This style is often referred to as Feng Shui, which is becoming very popular. Are you thinking of the career in Interior Design? Are you interested in physical spaces, and can you frequently notice your surroundings.

Unique but simple items of furniture can also complement color. It resembles a human tent and is also composed of ‘heavy-duty polyester’ and it has ‘nylon zipper’. Pretending that future casinos will play an upright, commendable role in the regeneration of cities is, at best, humorous. You can install a valance or cornice box over it to soften the harsh edges. by ArticleCity Blog.

The studio maintains a broad portfolio of projects including residential and commercial design, office planning, hospitality, retail and health care facility design. You don’t have to call home in the log where you can bring the powerful presence of natural wood in your living space. Eco Timber Hardwood Flooring, American Clay Interior Plaster, Blue Slide Art Tile, Plumbing Fixtures, Lighting, Window Coverings and much more.

At Artistic Windows, interior design is actually a collaborative effort between homeowners and designers. They are called eyelet curtains because they’ve got eyelets at the top the curtain, this is where the curtain rail is fitted to an easy gliding window treatment. For a monochromatic look just try changing up the textures and bringing in soft Egyptian cottons with cozy faux cashmere blankets and opulent silk curtains. . articledashboard.

Soft colors which have the look of nature are chosen to give the earthy furniture a peaceful, relaxing setting. This is completed in the entire text with every borrowed phrase or quotation having its very own citation. The software also includes textures for tiled floors, granite countertops and custom cabinetry. He can be known since the god of thunder. By: Michelle Spencer.

Article Directory: http://www. Rather than being outdated and old, retro takes the best of previous styles to produce a modern approach. It’s all a part of this trend to take away the formal aspect to living, the almost straitjacket feel where the interior is all lines and spaces and structured. Here certainly are a number of placement strategies that may be of benefit to you. Careers in Home Design directly affect the health, safety and overall wellness of the people that work well and live inside the spaces that Interior Designers design.

Photo Sources: Casa Batllo – Photograph by David Alan Harvey. home-decorating-reviews. . You will find more vital landscape design tips and data on Allen’s website, the Landscape Design Advisor.

Top Tension Adjustment

Start by looking at the machine.

As you sit at the machine most of them have a tension regulator directly facing the user. A numbered dial that may go from 1-9 or 1-4 or, on older machines, it may simply be a knob that turns. On some older machines, the tension regulator is at the end of the machine.

All tension regulators work on the same principle. The upper thread passes between two spring-loaded discs. By turning the dial clockwise or anticlockwise you increase or decrease the pressure on the thread as it passes through. Do not be afraid to turn your tension dial. A skilled operator may alter the tension many times while sewing a garment that varies in thickness.

Go try turning your dial.

First though, note where it is before you start and make sure you put it back to that mark.

Now did that feel good? Once you get used to adjusting your tension you will be able to impress friends and influence people. Well, not quite, but you will have the satisfaction of being the most popular person in your quilting class!

One important note. There are many machines on the market today that say AUTOMATIC tension. Is there really such a thing? I doubt it. Is there a little Pixie sitting inside your machine waiting for your fabric? Does he peek out of a small hole in the top of your machine? “Ah top of the morning to you, that material is thin but I reckon densely, so I’ll put your tension just there!”

In reality, most of these machines use the same old dials with the numbers removed and AUTOMATIC written on them. I know, I sell them. There are a few complex computer machines that also boast automatic tension, but they still can have trouble. It is a great selling point but you do need to learn to adjust your tension. There are those few computer machines that really do have self-adjusting mechanisms, but we are not concerned with them.

As you turn the dial clockwise, you are increasing the tension. Anticlockwise, decreasing it. The lighter the pressure on the dial the lighter the upper tension is in the fabric. What we are looking for, in a perfect stitch, is one that is interlocked evenly in the middle of the fabric layer.

For an illustration, open your hands and face them toward each other with your fingers apart. Now slide them together, interlocking your fingers. If you look at the palms of your cupped, joined, hands you will see the formation of a perfect interlocked stitch. This is what we are trying to get on your sewing machine. If the stitch is unbalanced the top or bottom thread can be easily pulled out. This gives you a weak, stitch.

There are the usual classic faults in tension. Loose threads, looping, puckering, bunching and many more. What we want to do is eliminate them all by understanding the simple procedure of tension adjustment. I have listed on my linked Fault Finding Page all the other faults that affect your sewing machine and that are not covered by tension adjustment.

OK, so here goes. We know that a simple twist of the wrist can be the difference between a perfect stitch and one that drives you crazy.

Firstly we must make sure the tension unit is working. Whatever number your tension dial goes up to, place it at half that, so you are in the middle of the dial. If your dial is un-numbered, turn from lowest to highest tension and judge the halfway point, set the adjustment to that point.

Put a reel of thread on your machine and thread the monster. Finally, pull the thread through the needle’s eye with the foot raised.

The reason the foot must be raised is that most machines have an automatic tension-disc release connected to the presser foot. As you raise the foot the disc’s release, allowing you to pull the thread through without bending the needle too much or breaking the thread.

Check that this is working. Pull the thread through with the foot up, then lower the foot and see what happens when you pull the thread with the foot down. It should become tight to pull.

If the thread is not tight enough to bend the needle—

  • your tension dial is not working properly, or
  • the tension so low that it does not work, or
  • the thread is not in the tension unit properly
  • At this point we must stop and talk about threads.

Some old threads cause so much trouble that they are better thrown away. Some threads are lumpy, some perish and some threads are riddled with knots.

When adjusting your machine always use a good quality thread. I, myself, prefer polyester threads as they give a good quality stitch with a bit of giving. Not many people realize that the top thread passes through the eye of the needle many times before it finally gets taken up in the fabric. You can see this, for yourself, by marking the thread above the needle and watching it as you turn the machine by hand. Polyester threads bear up to this rubbing—through the eye of the needle—much better than cotton. But, whatever threads you use, make sure it is of good quality.

You can carry out a little test here. Pull an arm’s length of thread off the reel and hold it between your hands so that the thread drops in front of you in a wide U shape. Move your hand’s closer together and see what the thread does. If you have a balanced thread nothing will happen. If you have an unbalanced thread the thread, as it gets closer together, suddenly twists around itself. This causes lots of problems, twisting around thread guides and jamming into tension disks. Do not use unbalanced thread.

In normal sewing, never mix threads on a machine unless you want to visit the lunatic asylum.

If the tension disks appear to be too loose, even on the tightest (clockwise) setting, and the thread is not being gripped, first check that the thread is between the disks, then check that there is nothing jammed between the disks that stops them from squeezing the thread (gently pry them apart, with minimum tension and look). You may have to dig out any remnents of thread that has become wound around the middle stud.

If the tension disks appear to be too tight, on the loosest setting, the disks may be rusty or there may be a foreign object lodged between them. Remove any foreign material. You might be able to polish lightly rusted disks by using light string around the disk slot and pulling it back and forth. In severe cases consult your repair person.

Back to business. Now that we have made sure the tension unit is working we need to adjust it to get a lovely stitch in your work. What we must do at this point is find an average balance for the average material. So get some normal fabric, say a strip of clothing-weight cotton cloth. Fold it double as if you were going to sew a seam. Place it under the machine and start to sew. Now examine the stitch. Remember what we are looking for—a balanced, even, stitch on the top and bottom, with the lock right in the middle of both layers.

A quick test you can carry out at this point is to get the end of one of the threads that is coming from the stitched material and pull it sharply. If it snaps on the first couple of stitches then it means the stitch is securely on the fabric. However, if the thread can be pulled out you will need to adjust your machine tension.

One point to note is that you can have a secure stitch that is too tight and puckers the work. We will deal with that shortly.

IMPORTANT At this point I must bring to your attention a really important factor. The top tension controls the quality of the underneath stitch in your fabric. It is the top thread that is being taken, by your machine, around the lower thread and then pulled back up. Too little top tension will not bring the lower thread far enough, too much will pull the lower thread right through both the fabric layers.

If you are still with me then things are looking good, have your eyes started to glaze over yet? Be patient we are on our way. Think of it as searching for the Holy Grail of tension balancing. At the end of your journey you will be enlightened and your path through the maze of tension adjusting will be clear.

Back to business. What we need to do now is to alter the stitch according to what the problem is. The lower section of the page deals with lower tension adjustment. I must impress on you that you should carry out Upper Tension Adjustment first, as this is much easier and the most common cause of a poor stitch, 9 times out of 10 in fact.

If you have a perfect underneath stitch but a straight-line stitch on top and turning the tension dial has no effect, go to lower thread adjustment, further down the page.

Note Some of the large reels of thread available today can alter a well balanced machine and throw the stitch balance out because they are harder to turn when the tread is unwinding. If you are having tension trouble and are using a large reel of thread, wind the thread onto a bobbin and place the bobbin on top of the machine and use it like a small reel of thread. Now continue.

What is the problem with your stitch? Is it all loopy underneath? This is the most common problem.

If you have a big mess underneath then your top tension is not functioning or you have threaded the machine wrongly. See the fault finding link.

So, here we are at last, down to the nitty-gritty. It is so simple that it hurts. By adjusting the top tension clockwise the loops will slowly disappear. Run along about 6 inches of fabric and examine the underneath stitch. Alter the numbers one at a time, say from 4 to 5, check each time you do. Keep going until you find that the top and bottom match. Remember the hands? Now, the number that you have reached on your dial is the BALANCE POINT.

It does not matter what the number is. All machines, like humans, are slightly different. One machine may run beautifully on number 2 while another machine of the same type will be running on number 7.

A professional sewing machine engineer usually balances your tension dial to the middle so that you may increase or decrease it. This is an internal adjustment for trained experts.

Once you have found this BALANCE POINT make sure you remember it. From this number you should be able to sew 90% of all fabrics. You may decrease the number for lighter work, say nets or satin, and increase it for curtains or denim. But always put the tension back to this point.

If the top and bottom tensions are balanced but both too tight the fabric will pucker. Loosen both top and bottom tensions a little at a time (lower thread adjustments) until a smooth stitch is created.

To finish off the top tension adjustment, one final point. It will not matter how many times you adjust your tension dial; master the dial and the world will be yours.

Well done!

The Complete Guide To Tension Adjusting

Sewing machine thread tension adjustment falls into upper (top) and lower (bobbin case) adjustments.

For lower, bobbin case, adjustment follow down the page, always adjust top tension first. To return to the top of the page click on your back button.

This is a long and informative piece on tension. Put the kettle on and make yourself a nice cup of tea, then take your time to read it. It will be worth it in the end.

For many people tension adjustment is an enigma inside a riddle. The mere thought of altering the tension makes some people shudder and run for the gin. Others move toward the machine, in fear, circling a few times, muttering to themselves, before attempting to touch anything. I have known people throw sewing machines out of windows. I have seen women cry and men get mad over this one topic. Growing up in a factory full of sewing machines I soon came to learn many new words, that I passed on to eager classmates at school, all because of the humble sewing machine. I know someone—a man—who threw an industrial machine out of a third-floor window because of tension adjustment.

Well, the truth is that it is actually very easy to adjust your machine’s tension so long as you follow simple procedures. Before we start I must mention one point, although it is mainly women—over 90%—that sew, many men also sew; designers, upholsters, tailors, sail makers and so on. This adjustment pages works just as well for both sexes.